PLA-Matte
PLA-Matte is a cost-effective matte PLA filament that is environmentally friendly and easy to print. Compared with ABS, matte PLA has higher rigidity and PC-like strength and does not require a closed cavity. PLA matte filament has low shrinkage, no warping and no cracking quality, and suitable for large-size model printing; The support is easy to peel from the surface.
- * Description:
-
Description
Matte PLA filament has no smell when printing, which is safe and environmentally friendly; And the spool is made by reusing injection molding of PETG, ABS, PLA production waste and other industrial waste, and the outer box is made of recyclable paper. Make 3D printing more sustainable with the environmental protection concept; The matte PLA surface is delicate and does not show layer lines; The filament is not easy to break which made the printing is smooth for a long time without clogging. PLA matte filament can be used for early concept models and rapid prototyping. Low density, PLA-Matte single-roll filaments are 21% more than other matte PLA product print models.
Sellingpoint
Environmental friendly
Cost-effective
High-speed printing
Easy to peel off the supportView more about PLA Filament
Excellent printability
Hard to break
Matte surface effect
Low density
- * Product introduction video
-
- * Application
- * Print model
-
PLA-Matte filaments are softer than others, so the extruder’s tightness adjustment is better not to be too tight, in case to affect printing.
-
Parameters forbrBambu Lab & Creality -
MSDS -
TDS -
ROHS -
REACH
| Density(g/cm3) | 1.329 |
| Melt Flow Index | 5.8（190℃/2.16kg） |
| Heat Distortion Temp(℃,0.45MPa) | 51 |
| Tensile Strength(MPa) (XY) | 25.976 |
| Tensile Strength(MPa)(Z) | 14.31 |
| Elongation at Break(%)(XY) | 7.23 |
| Elongation at Break(%)(Z) | 2.26 |
| Flexural Strength(MPa)(XY) | 42.6 |
| Flexural Strength(MPa)(Z) | 21.1 |
| Flexural Modulus(MPa)(XY) | 2249.05 |
| Flexural Modulus(MPa)(Z) | 1782.62 |
| IZOD Impact Strength(kJ/㎡)(XY) | 4.7 |
| IZOD Impact Strength(kJ/㎡)(Z) | 2.15 |
| Extruder Temperature(℃) | 190-230℃ |
| Bed temperature(℃) | 45-60℃ |
| Fan Speed(％) | 100% |
| Printing Speed(mm/S) | ＜200mm/s |
| Heated Bed | Need |
