TPU-64D
TPU64D through the use of special modification methods reduced material processing temperature and improved low-temperature plasticisation and surface smoothness. Additionally, it makes the production line more stable. Higher hardness and lower printing temperatures make TPU less susceptible to softening, so it is no need to worry about the material being too soft, which makes it difficult to feed, and greatly improves the printability of the material, which can be adapted to a wider range of printers and print more complex models. The strength of the model has also been improved.
- * Description:
-
Description
TPU64D through the use of special modification methods reduced material processing temperature and improved low-temperature plasticisation and surface smoothness. Additionally, it makes the production line more stable. Higher hardness and lower printing temperatures make TPU less susceptible to softening, so it is no need to worry about the material being too soft, which makes it difficult to feed, and greatly improves the printability of the material, which can be adapted to a wider range of printers and print more complex models. The strength of the model has also been improved.
Features
Supple and resilient
Highly elastic and abrasion resistant
High hardness and durabilityWide adaptability
Easy to print
- * Application
- * Print model
-
1. TPU materials are easily exposed to the air to absorb moisture. After absorbing moisture, the printing will appear drawing, bubbles will be extruded, and the printing surface will be rough, which will reduce the printing quality. It is recommended to put the wire into the drying box (humidity is controlled below 15%) immediately after opening the package for printing. It is recommended to seal and store unused wires.
2. When the material is damp, the printing will increase drawing, bubbles will be extruded, and the printing surface quality will be rough. Please put the wire in a 60-80℃ oven to dry for 4-8h.
3. High-hardness TPU can be adapted to remote printers, but in order to increase the success rate, it is recommended to use a short-range extruder.
-
Parameters forbrBambu Lab & Creality -
TDS -
MSDS -
REACH -
ROHS
| Density(g/cm3) | 1.21 |
| Tensile Strength(MPa) (XY) | 39 |
| Tensile Strength(MPa)(Z) | 25 |
| Elongation at Break(%)(XY) | 140 |
| Elongation at Break(%)(Z) | 46 |
| Extruder Temperature(℃) | 210-250 |
| Bed temperature(℃) | 0-60 |
| Fan Speed(％) | 100% |
| Printing Speed(mm/S) | ＜150mm/s |
| Heated Bed | Need |
| Printing Suggestions | Drying at 55 ℃/>4h, close range extruder, slow speed printing |
